Mohawk No Blush Plus Retarder Aerosol

Humidity or cold weather can cause a finish to turn white (blush). Mohawk No Blush™ Plus Retarder re-flows the finish and allows the trapped moisture to escape.

Mohawk’s No Blush™ Plus Retarder contains a special solvent blend designed to eliminate blushing (hazy whiteness or cloudiness due to trapped moisture) in lacquer finishes.

NB. Previously available under the Behlen brand which has been discontinued by the parent company Mohawk. Same product.

ADVANTAGES:

1. Easy to use.

2. Very effective.

3. Controlled results.

Eliminates the need to sand or strip the finish.

13fl.oz. (384ml) pressurised aerosol.

 This product cannot be shipped outside of Australia.

This product is delivered by road transport only, but can be delivered to PO Boxes.

Protective clothing and equipment should always be used when working with any finishing products. The use of appropriate respirators, face-masks, eye protection, and full-body clothing is recommended, and always work in a well ventilated area. 

DIRECTIONS:

SHAKE WELL for at least one minute after ball rattles. Can temperature should be between 18° and 32° C. Hold can 12 to 14 inches away from surface to be coated. Press spray button firmly. Spray in thin coats to avoid excessive drying times. Wait a few minutes to see if problem is solved before spraying another coat. Clean spray button after use by turning can upside down and pressing spray button until no more product comes out.